In short (TL;DR)
- What it is: adapting the engine control unit (ECU) software of a tractor or other agricultural machine for higher torque and better response.
- What we do: the software work only. We do not do mechanical work.
- Price: from €300. The final price depends on the engine and the ECU.
- For what: tractors and other agricultural machinery with a programmable ECU. Not every model is supported – we check before the work.
- Limits: the transmission, hydraulics, clutch, turbocharger and cooling must withstand the higher load.
- Legal position: a power increase may not match the type approval and may affect warranty and insurance. Before the work we recommend discussing this with us and with your insurer.
Agricultural machinery power increase means adapting the engine control software at ECU level. Fuel delivery, boost pressure and other parameters are changed so that the engine makes better use of its potential under working conditions.
Who it suits
- Tractors and other agricultural machinery with a programmable engine control unit.
- The machinery must be technically sound – software does not remove mechanical defects.
- The result is most noticeable during work, when the engine runs under load.
What must be assessed before the work
| Question | Why it matters |
|---|---|
| Is the ECU supported? | Not all machinery has a reprogrammable ECU. We check this before the work and, if it is not supported, we do not start. |
| Transmission and hydraulics | Higher torque loads the gearbox, the power take-off shafts and the hydraulic pumps. We discuss the limits in advance. |
| Turbocharger and cooling | Long work under load requires good cooling and a stable exhaust gas temperature. |
| Warranty and insurance | A software change may affect the warranty, insurance or financing terms. |
| Legal side | A power increase may not match the type approval. Discuss it with us before ordering. |
What we do not promise
We do not promise a specific power or torque gain in advance: it depends on the engine, the condition of the machinery and the ambient conditions. We do not promise lower fuel consumption either. Before the work we tell you what result can reasonably be expected.
Price
Agricultural machinery power increase costs from €300. We give the exact price after checking the model, engine and ECU. A similar service is also available for trucks and tractor units.
Frequently asked questions
Does it suit my tractor?
It depends on the make, the model and the ECU type. Before the work we check whether the software can be read and changed. If the model is not supported, we do not start.
How much power will you add?
We do not promise a specific number – it depends on the engine and the conditions. Before the work we tell you what gain can reasonably be expected in your engine.
Will the transmission withstand higher torque?
This is one of the main questions. Before the work we discuss the limits of the transmission and hydraulics and, if needed, limit the software.
Can the factory software be restored?
Yes. Before the work we save the original ECU software.
Will this affect my warranty?
If the machinery is still under the manufacturer’s warranty or financing, a software change may affect their terms. We discuss this before the work.
Do I need to inform my insurer?
Yes, we recommend it. A power increase is a modification of the machinery that can affect insurance.