REMAP + EGR OFF

Remap Stage 1 combinado con eliminación EGR en un solo archivo. Mejor rendimiento con admisión más limpia.

45 min tiempo
Garantía de calidad
Soporte 24/7

What is Remap + EGR Off?

Remap + EGR Off combines a Stage 1 performance remap with a complete EGR (Exhaust Gas Recirculation) system software delete in a single ECU calibration file. This popular diesel combo delivers more power and torque while simultaneously eliminating the EGR system that causes carbon buildup, intake contamination, and long-term reliability issues.

The EGR system recirculates a portion of exhaust gases back into the intake manifold to reduce NOx emissions. While effective for emissions compliance, this process introduces hot, soot-laden exhaust gas into the clean intake tract, coating the intake manifold, valves, and intercooler with carbon deposits over time. By disabling EGR in software and combining it with a Stage 1 remap, your engine breathes only clean, cool air — resulting in better combustion, more power, and significantly improved long-term reliability.

Benefits of the Combined Approach

When remap and EGR Off are developed together as a single calibration, the results are superior to applying them separately:

  • Cleaner intake charge — with no exhaust gas recirculation, the engine receives only fresh air, improving volumetric efficiency and combustion quality
  • Lower intake temperatures — exhaust gas raises intake temperatures significantly. Removing it allows the intercooler to work more effectively
  • Optimized remap — the Stage 1 calibration is developed knowing the intake is unrestricted, allowing more aggressive timing and boost targets
  • Reduced carbon buildup — the primary cause of intake manifold and valve carbon deposits is eliminated
  • Single flash operation — one file, one flash cycle, less time and risk
  • Cost effective — combo pricing saves money compared to ordering separately

What Gets Modified

Stage 1 Remap

  • Fuel injection timing and duration optimization
  • Boost pressure target maps increased
  • Rail pressure curves adjusted
  • Torque limiters recalibrated
  • Smoke limiter optimization
  • Throttle response improvements

EGR Delete

  • EGR valve commanded permanently closed
  • EGR mass flow maps zeroed
  • EGR cooler bypass strategy disabled
  • EGR temperature monitoring adjusted
  • All EGR-related diagnostic trouble codes suppressed

Supported ECU Platforms

This combo service is available for all major diesel ECU platforms including Bosch EDC16, EDC17, MD1, and MG1 series, Continental SID201 through SID210, Delphi DCM3.5, DCM6.2, and DCM7.1, Denso SH7058 and SH7059, and Marelli MJD series. The service covers passenger cars, SUVs, and light commercial vehicles from all major manufacturers.

Performance Gains

The combination of a Stage 1 remap with EGR Off typically delivers:

  • Power increase: 20-30% over stock
  • Torque increase: 25-35% over stock
  • Improved fuel economy: 5-10% reduction in consumption
  • Smoother power delivery throughout the rev range
  • Better throttle response with cleaner combustion

When to Choose Remap + EGR Off

This combo is ideal when:

  • The EGR valve is stuck, clogged, or failing
  • Carbon buildup in the intake manifold is causing performance loss
  • You want to prevent future EGR-related maintenance costs
  • You are already planning a Stage 1 remap and want to protect the intake system
  • The vehicle is used in conditions where EGR causes excessive soot recirculation

Our Process

  1. Read your ECU — extract the original file using your preferred tool
  2. Upload and select — choose Remap + EGR Off as your service
  3. Integrated calibration — both modifications developed as one optimized file
  4. Quality verification — checksum correction and validation
  5. Download and flash — single file, single flash operation

Turnaround: 30-60 minutes during business hours.

Características

Remap Stage 1 + eliminación EGR en un archivo
Aire de admisión más limpio para mejor combustión
Previene acumulación de carbón en colector de admisión
Válvula EGR cerrada permanentemente por software
Todos los códigos de error EGR suprimidos
Remap optimizado para admisión sin restricción
Un solo flash
Corrección de checksum incluida
Todas las plataformas ECU diésel principales
Plazo de 30-60 minutos

Plataformas ECU soportadas

Bosch EDC16Bosch EDC17Bosch MD1Bosch MG1Continental SID201Continental SID206Continental SID208Continental SID209Continental PCR2.1Delphi DCM3.5Delphi DCM6.2Delphi DCM7.1Denso SH7058Denso SH7059Marelli MJD6xxMarelli MJD8xx

Herramientas compatibles

AutotunerKESS V2KESS3K-TAGCMD FlashMagic Motorsport FlexTrasdataNew TrasdataPCMFlashBitEditBDM100Galletto

Preguntas frecuentes

¿Por qué combinar remap con EGR Off?

Cuando ambos se desarrollan juntos, el remap se optimiza para aire de admisión limpio sin recirculación de gases de escape, ofreciendo mejor rendimiento que aplicarlos por separado.

¿El EGR Off causará testigos?

No. Todas las rutinas de diagnóstico EGR se desactivan correctamente.

¿El EGR Off afecta el consumo?

EGR Off combinado con remap mejora típicamente el consumo un 5-10% gracias a una combustión más limpia y dosificación optimizada.

¿Puedo añadir DPF Off más tarde?

Sí, pero recomendamos pedir el paquete diesel delete completo directamente si necesitas varias eliminaciones.

¿Cuánto tarda la entrega?

La mayoría de archivos Remap + EGR Off combo se entregan en 30-60 minutos en horario laboral.